Table of Contents
Is 1066mhz RAM good?
In modern editing 1066 is a bit slow. You’ll want to go for something well balanced such as 1866MHz RAM, and buy the same model for all sticks in the future due to the voltage irregularities and recognition issues different modules create.
Which is the best 4GB RAM for laptop?
4GB RAM For Laptop Price List
Best 4GB RAM For Laptop Price List Models | Price |
---|---|
Samsung M471B5173DB0-YK0 4GB DDR3 RAM | ₹1,750 |
Sk Hynix (HMT451S6AFR8A-PB) 4GB DDR3 Ram | ₹1,395 |
Adata Premier (ADDS1600W4G11-R) 4GB DDR3 Laptop RAM | ₹1,585 |
Transcend TS512MSK64W6H DDR3 4GB Laptop RAM | ₹2,330 |
Which DDR3 4GB RAM is best for laptop?
4GB DDR3 RAM Fro Laptop Price List
Best 4GB DDR3 RAM Fro Laptop Price List Models | Price |
---|---|
Samsung M471B5173DB0-YK0 4GB DDR3 RAM | ₹1,750 |
Sk Hynix (HMT451S6AFR8A-PB) 4GB DDR3 Ram | ₹1,395 |
Adata Premier (ADDS1600W4G11-R) 4GB DDR3 Laptop RAM | ₹1,590 |
Transcend TS512MSK64W6H DDR3 4GB Laptop RAM | ₹2,330 |
Can I put 1600mhz RAM in 1333?
RAM speed is set by your motherboard and processor combination. In short, yes 1600mhz ram will work at 1333mhz just fine.
Can I put 1333MHz RAM in a 1066mhz slot?
Both memory modules should work and operate at 1066 MHz. If properly supported, the modules will operate in dual-channel mode, but both modules will be limited to the slower one, which is unlikely to be noticeable. There should not be any significant problems in terms of system performance or stability.
Will higher Mhz RAM work?
Rick’s answer: Eric, the short answer to your questions is yes. Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. For example, if your motherboard supports a maximum of 8GB then you won’t be able to install any more than that..
Can I replace 1333MHz RAM with 1600MHz?
The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.