Is Motul 300V better than 7100?
7100 has more detergents and dispersants for cleaning which will typically allow for longer drain intervals, 5000 miles + depending on the rider. 7100 has an API rating of SM which makes in cleaner for bikes with catalytic converters and O2 sensors. 300V can be used on the street but it’s really designed for racing.
Can you mix Motul 300V with 7100?
Re: Mixing Motul 7100 and 300V You can mix any oil you want.
Is Motul 7100 Good?
It’s recommended for four-stroke motorcycles and ATVs. Motul 7100 Synthetic Oil 4T is the best motorcycle oil recommended for all four-stroke motorcycles with catalytic converters. Meets JASO MA, API SL standards. Designed with ester technology for better engine response.
What is the difference between Motul 300V and 300v2?
300V has double ester meaning Motul has used 2 types of esters in its formula – 1 to be used for friction reduction and 1 for extreme pressures. 300V has less detergents and dispersants vs. 7100 because they’re replaced that with extreme pressure additives for built engines.
How long will a Motul 7100 last?
Conclusion: All in all the Motul 7100 Fully Synthetic oil is absolutely worth the money it costs. Its drain interval is at a steady 6000-7000 kms to be on a safer side, though it is very much capable to carry on up to 8000 kms if you do not tend to ride your bike hard.
Why Motul 300V is expensive?
Being fully synthetic means it has an artificial formulation to meet the different needs of your engine. That is why it comes at a higher price. Motul 300V is better for use in your bike engine than conventional oils.
Can I use Motul 300V street?
I did a bit more research into the topic of “300v for street use” today. For those who don’t know, Motul makes two 100% Synthetic Ester based lubricants (oils), 300v Power, and 7100 4T. The first is recommended for race use and the latter is made for street use.
Is Motul 10w40 good?
Its anti-wear, anti-oxidant, and anti-foaming properties make it the best option to improve gear protection and gearbox life time. https://www.motul.com/ca/en-US/products/5100-4t-10w40 you probably want a high-performance lubricant for your motorcycle, and the Motul 5100 4T 10W-40 is highly recommended.
What is the drain interval of Motul 7100 10w40?
around 3500 to 4000 kms
Motul 7100 10w40 is a good performance engine oil which gives a butter smooth experience in both lower rpms and higher rpms. Drain interval must be around 3500 to 4000 kms which is good for your engine.
Is Motul the best engine oil?
Motul Synthetic Engine Oil is compatible with gasoline and diesel engines & reduces fuel consumption. This Motul product has also been approved by major car manufacturers like BMW, Porsche, Mercedes Benz and VW which makes it one of the most recommended synthetic oils on the market.
What’s the difference between Motul 7100 and 300V oil?
The difference is 300V suit those with CAT installed on their street bike while 7100 is the opposite. In general 300V is the higher end between the two because this oil is designed to be the companion of racing bikes which means boosted performance as well.
Can a Motul 7100 be used as a street bike?
you should not be using 300V in a street bike. Stick to 7100. While 300V will shift a little easier, it is intended for a race weekend and no more. The purpose is to squeeze out that extra HP or two, but is not intended for longevity. No benefit in using it for “winter storage” either.
Why do I use Motul 30w50 instead of 300V?
The 300v is a high performance oil. It’s made to protect and also to free up horsepower. If you put the Motul 300v 15w50 on a chart against other oils, it would be at the lower end of the scale (meaning it’s thinner, more “slippery” and performance-oriented, due to the Ester technology and such).
Can a Motul 4T be used as a catalytic converter?
Of course, Motul claims that the 300V is suitable for catalytic converters (and I believe them!). But yup. I checked – Motul’s 300V 4T is also NOT certified JASO MA or API SL that the Bajaj manual calls out for.