Table of Contents
What does F mean on a Kenmore Elite washer?
a component problem
The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
How do I reset my Kenmore Elite washer?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
What does F code stand for?
FCODE
Acronym | Definition |
---|---|
FCODE | Forth Code (electrical engineering) |
Why is my Kenmore washer stuck on sensing?
When Kenmore HE Washer is stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift Actuator not able to change position, before Wash cycle. Control Board malfunctioned.
How do I make my Kenmore Elite spin only?
7 Answers from these members:
- TURN THE POWER BUTTON ON, PUSH THE SPIN SPEED BUTTON NEXT TO DESIRED LEVEL, THEN PRESS START, THERE YOU GO , IT WILL ONLY SPIN, NOT RINSE AND SPIN – Worked for me on my Kenmore Elite.
- I have a Kenmore series 600 top loader that has been nothing but problems since day.
What does IE mean on a Kenmore Elite washer?
water fill
The IE code indicates that the washer detects a problem with water fill. Make sure that the hot and cold water supply faucets behind the washer are fully open. If you are using Floodsafe fill hoses that are shown in the image below, then I recommend that you replace those with conventional fill hoses.
Why does my Kenmore Elite have an F72 error code?
What this does is disengage the basket from the motor so that the agitator can rotate independently from the basket. If the basket does not float then when it tries to agitate the whole basket will turn back and forth at the same speed as the agitator and this will cause the F72 error code.
What does ER mean on Kenmore Elite refrigerator?
Kenmore elite refrigerator error code er co. This error code stands for ‘communication error’ and occurs due to communication failure between the main control board (on the back panel) and display control board (on the freezer door).
What to do if you get an error code on your Kenmore refrigerator?
If you see the code on the display, please, check the fan in the back of the freezer. The fan’s mission is blowing air toward the ice maker. In some cases, the error can be cleared by unplugging a refrigerator and plugging it back after about 5 minutes.
What does floating mean on a Kenmore Elite?
Floating is when the tub fills up with water to a certain level the inner basket will rise about 1 inch from the center agitator. What this does is disengage the basket from the motor so that the agitator can rotate independently from the basket.