Table of Contents
Is Audio Technica AT2020 good for vocals?
The Audio-Techica AT2020 microphone is excellent at capturing vocals and pulling out the unwanted noise. It’s very easy to set up, record, and mix. It will come especially handy for videos, podcasts, and anything that requires speaking.
What is the Audio Technica AT2020 good for?
The Audio-Technica AT2020 is one of those rare microphones that give you good sound quality but at a very affordable price. Because of its attention to acoustic detail, it is also perfect for recording acoustic guitars and other acoustic instruments.
How close should you be to AT2020?
As a general rule, we recommend staying about 4-6 inches away from the microphone when you are speaking into it. If you get too close to the microphone, you will be prone to getting plosives. If you get too far away from the microphone, you will notice that the tone is thin an wispy.
Are Audio Technica microphones good?
Clearly Audio-Technica aren’t without some stiff competition, but they have a reputation for good engineering and good-sounding mics, and a bit of reputation goes a long way when you’re trying to choose between similarly priced microphones.
How do I make my Audio Technica AT2020 sound better?
If you want optimum performance for your AT2020, you need to make the right adjustment to your microphone level. It should be high as it can be, sans overloading your computer’s input. You should turn the mic volume level down once you hear distortion or if the recording software indicates high peak levels.
What vocal mic does Billie Eilish use?
Audio-Technica AT2020 Cardioid Condenser Microphone Billie’s vocals for ‘Ocean Eyes’ were recorded with the 2020, which sounds great.
How do I make my AT2020 sound good?
How do I talk in AT2020?
The AT2020 and AT2035 have a cardioid directional pickup, so the optimal pickup area will be directly in front of the microphone element. As you move away from this optimal spot and speak into the sides and back of the microphone pickup area, the sound will decrease in volume and quality.
Which is better AT2020 or AT2035?
There is a slight difference in the power requirement of both these mics. Audio technica AT2020 requires 48V DC, 2mA typical while AT2035 requires 11-52V, 3.8 mA typical. Audio technica AT2035 has a better carrying case than that of AT2020, as the latter’s bag feels flimsy and offers no padding whatsoever.
What kind of frequency response does Audio Technica at2020 microphone have?
The Audio Technica AT2020 is a side-address, dynamic cardioid microphone that has a frequency response that extends from 20Hz to 20kHz. Its best used for recording vocals and instruments, and it features rugged construction that is designed to be able to withstand the rigors of the road.
Is the at2020 capacitor microphone good for studios?
This could be good news when working in studios with computers, as keeping the computer noise out of the microphones can be a major headache. As a low-cost, general-purpose capacitor microphone, the AT2020 is hard to fault other than on account of its noise level.
What kind of SPL does the at2020 Mic have?
AT2020 has a wide frequency response of 20Hz to 20KHz and a high max SPL of 144dB. It has USB and XLR connectivity which is much easier for anyone. The microphone is famous for its comprehensive frequency response and high SPL. Let me explain to you some of its other great features that you get with this mic.
What’s the difference between the at2020 and at2035?
Self-noise is a respectably low 12dB EIN, equating to a signal‑to‑noise ratio of 82dB at 1kHz at 1Pa — some 8dB lower than that of the AT2020. Structurally and cosmetically, the AT2035 is very similar to the 2020, weighing 403g and measuring 170mm long, with the widest point of the body being 52mm in diameter.