Table of Contents
How many gallons per minute does a log splitter use?
This 11 gallon per minute hydraulic pump is a must have for any log splitter application. Fits a wide range of applications, most commonly used on log splitters with a rated force less than 35 TON.
What size hydraulic pump do I need for a log splitter?
If you are serious about making your own backyard log splitter, then you want to have, at a minimum, the following components to provide the right amount of force and power for basic splitting of averaged sized, seasoned logs: A 5 Horsepower engine. A two-stage hydraulic pump rated at a max of 3 gpm at 2,500 psi.
Why is it important for log splitters to have two stage pumps?
Two stage pumps give splitters great performance using small engines. When the valve is in neutral & system pressure is low, both gear sets are pumping oil into the system. With a “16 GPM” pump, they will pump 16 GPM when the pump shaft is rotated (by the engine) at 3400 RPM.
What is the difference between a single stage and a two stage hydraulic pump?
The reason why it is called a “single-stage” pump is because the flow of oil produced is the same on each stroke of the handle. Two stage hydraulic hand pumps give the operator higher flow rates up until the cylinder or ram starts to do work.
Can I put a bigger pump on my log splitter?
A 8 hp or bigger will handle a 16 gpm 2-stage pump. Log splitter pumps are 99% interchangeable. The only thing special about the pumps that the splitter manufacturers sale is the PRICE.
How do I know if my log splitter pump is bad?
If you have pressure there when you move the control to the split position then the problem is your cylinder. If you don’t have pressure there, put the gauge in the output line of your pump. If you don’t have pressure there, then you have a bad pump.
How can I make my log splitter more powerful?
Most splitter systems run around 2200 to 2500 psi. The higher the pressure the more heat that you generate and the sooner things wear out. Use a guage and make sure the system is at normal operating temp when you set the pressure. A larger ram is the best way to get more splitting power.
What does a two stage hydraulic pump mean?
A two-stage pump is an ingenious time-saver. The pump actually contains two pumping sections and an internal pressure-sensing valve that cuts over between the two. One section of the pump generates the maximum gpm flow rate at a lower pressure.
What types of valves are included in hydraulic pumps?
The various types of pressure control valves used in hydraulic systems include relief valves, reducing valves, sequence valves, counterbalance valves, and unloading valves.
How can I speed up my log splitter?
Only way to speed up a splitter is to move more oil. Either get a bigger pump or speed up the existing pump.
Why does log splitter lose power?
Losing Driving Force When Splitting Wood? Temperature could also be the culprit for loss of driving force, as hydraulic oil is more viscose in cold weather resulting in a weak response until the machine warms up. If it is not any of the above, then the log splitting machine may require a piston or pump replacement.
How do I get more power from my log splitter?
What is the best hydraulic pump for a log splitter?
Three-point log splitters are arguably the most popular choice. They have no internal hydraulic pump because they are plugged in directly to your tractor by one of its auxiliaries. This way, they leverage the tractor’s hydraulics to supply the required force to split the logs.
What are the components of a log splitter?
A log splitter is a heavy duty piece of equipment which eliminates the need for a maul and hours of backbreaking labor. A log splitter consists of a hydraulic or electrical rod and piston assembly, often rated by the tons of pressure it can generate.
What is a two stage pump?
Two stage pumps basically have two rotors and two sets of vanes. The first stage generates a medium vacuum and the second stage processes the exhaust of the first stage to create a better vacuum. As a result, two stage pumps can produce a deeper vacuum than single stage pumps.
What is a hydraulic log splitter?
Hydraulic Log Splitter. A hydraulic log splitter is capable of splitting large amounts of firewood with ease. These machines can be used to split both hardwood and softwood , along with pieces containing knots which are often difficult to split manually.