Table of Contents
How do I unlock my Honeywell TH8000?
To unlock your RTH8500 Wi-Fi Series or TH8000 Series thermostats, follow these steps:
- Hold down System and Auto with two fingers on your display.
- Press and hold the blank lower center button, until the display changes.
- Change the left values to 0670 using the up/down buttons in the middle of the display.
How do I reset my Honeywell 2 button thermostat?
To reset your Honeywell Thermostat, switch it off, remove the batteries, and put them back in reverse polarity, negative terminals facing positive. After 5 seconds, reinsert them the right way.
How do you reset the schedule on a Honeywell thermostat?
To clear the program schedule on your Honeywell Thermostat, press the “Hold” button. For all scheduled periods, this will overrule the set temperature. The programmed schedule is cleared when you hold down the Hold button, and you will be prompted to enter a new temperature setting for the thermostat.
How do I fix my touchscreen thermostat?
First, you should try replacing the batteries and factory resetting your touchscreen thermostat. Also, try removing the cover of your thermostat and checking the wiring to make sure everything is attached properly.
How do you bypass a locked Honeywell thermostat?
Here’s how to do it:
- Press MENU on the thermostat, and go to LOCK.
- Select “OFF” if it prompts you to choose a new lock setting.
- Press the center button and hold to unlock the keypad.
- Enter your keypad code.
- Press “SELECT” to finalize your code.
- If your keycode was correct, your thermostat will be unlocked.
How do I reset my Honeywell thermostat touch screen?
Press and hold down the Weather button for 5 to 10 seconds (until the Menu button appears). Once on the Menu button, you just scroll down to the Factory Reset option. Once there, select OK. Then select Yes and Okay.
How to contact Honeywell about VisionPro th8000 series?
For assistance with this product please visithttp://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 BE CAREFUL! Never use sharp instruments, such as a pencil or pen, to press touchscreen keys. To prevent damage to the thermostat, always press keys with your fingertip.
How to read the Honeywell VisionPro installation manual?
Read online honeywell 8000 installation manual pdf with better navigation.Printable and download Honeywell VisionPRO TH8000 Series User Guide Pdf Note: For opening this Honeywell VisionPRO TH8000 Series Installation Manual, your computer need Adobe Reader. You can get the Adobe Reader for free by going here https://get.adobe.com/reader/
How to help with a Honeywell VisionPro thermostat?
VisionPRO® TH8000 Series Touchscreen Programmable Thermostat 69-1894EFS-05 ENGLISH Need Help? For assistance with this product please visithttp://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 BE CAREFUL! Never use sharp instruments, such as a pencil or pen, to press touchscreen keys.
When to not operate the VisionPro th8000 cooling system?
CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50˚F (10˚C). VisionPRO® TH8000 Series Operating Manual 2