Table of Contents
What angle should a chainsaw blade be sharpened at?
Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.
What is the correct direction for a chainsaw blade?
The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. So the sharp edges of the blade should always face the clockwise direction. If you check from the top, you will notice that the sharp edges are facing the direction opposite the chainsaw body or motor.
Can you put a chainsaw chain on the wrong way?
When replacing the chain on your chainsaw is to make sure that the cutting part of your chain is facing the right direction. Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut.
Is my chainsaw blade on backwards?
As you run your hand along the blade feel which way hooks you. On the upper half, it should hook you hand as you run it toward you. On the lower half, it will hook your hand as you run it away from you. If your chainsaw is on backwards or is simply blunt take the saw to a sharpening expert.
Can you cut wet wood with a chainsaw?
Yes, you can use a chainsaw to cut wet wood.
How long should a chainsaw blade stay sharp?
A chainsaw requires sharpening when you feel it is getting dull. However, it is advisable to sharpen your chain after at least 5 hours of use.
Why does my chainsaw blade keep coming off?
Sometimes, a damaged chain or bar can cause the chain to become loose. This is one of the most dangerous reasons as to why your chainsaw chain might be loose. Your chainsaw bar has a groove that runs around its outer edge. To determine if there is any damage to your chain or bar, remove the chain, bar, and chain cover.
What is the proper angle to sharpen a chainsaw?
Typically you should use between two to five strokes for optimal sharpening. Hold the file guide 90 degrees to the flat face of the chainsaw bar. In order to determine the proper filing angle check your owner’s manual or check online at the manufacturers website. Typically it’s 25, 30 or 35 degrees.
What is the best chainsaw chain sharpener?
Here is a list of the Best Chainsaw Sharpeners of 2019 10. Oregon 30846 12-Volt Sure Sharp Chain Saw Sharpener 9. Garrett Wade Quick Feed Chain Sharpener 8. Oregon 620-120 Hydraulic Assist Saw Chain Grinder 7. Oregon 410-120 Bench or Wall Mounted Saw Chain Grinder 6. Oregon 5/32-Inch Chain Saw Sharpening Kit
How do you sharpen a chainsaw?
The best way to sharpen a chainsaw is to file the teeth from the inside of the bar. This will lessen the chance of getting the file droppings into the bar channel. Sharpen one side first until it is already very sharp, then go on to the next one. Mark the ones you’ve already done filing with a marker.
What angle to use on electric chain sharpener?
The most common swivel angle is 0 degrees to 60 degrees. Sometimes it is also increased to 80 degrees. Again go to the specification obtained from step 1 and see what is the given blade tooth angle. In the electric chainsaw sharpener this angle can be adjusted by loosening a knob in the blade holder.