What temperature should Rinnai be set at?
Can I set the temperature higher than 120℉ on my Rinnai tankless? For your safety, Rinnai tankless water heaters come with a maximum temperature default setting of 120℉ to help prevent scalding. However, by following these simple steps, you can increase the temperature to 140℉ if you choose.
What is the priority button on Rinnai?
When you press the “Priority button,” the green light will glow, indicating that the controller controls the temperature and that a water heater is ready. Rinnai water heaters work in the temperature range from 98 F to 140 F, while they come with the factory setting of approximately 120-125 F.
How do I reset my Rinnai WIFI module?
Press and hold the Connect button on the module until the LED blinks RED and WHITE, and then release then QUICKLY tap 3 times. This will restore the module back to original factory settings.
Does the Rinnai have a reset button?
Press On/Off button twice. Turn hot water back on and test. You may have to try this a couple times to reset the system.
How do you reset a Rinnai?
MASTER RESET: Rinnai
- Press and hold A and B until P appears ( approximately 10 seconds)
- Press and hold A and B until PLC appears ( approximately 10 seconds)
- The unit will power off.
- Press the power button until the unit powers back up.
Is the Rinnai B24 50 deg C compliant?
REU-VM2630WD Q51403C. The model code of the Rinnai B24 it is fitted to is REU-VR2426WB-50-AK (50 deg C Compliant models have “50” added as a suffix). Very grateful for your interest. smeagols ghost writes…
How can I change the temperature of my Rinnai Water Heater?
If required, the temperature can be changed via the dip switches on the PCB or with a localised controller. For further information, please contact Rinnai. Rinnai water heaters are powered flue appliances.
Can a whirlpool Rinnai be raised to 50 deg C?
Despite this unequivocal information, a posting in the Whirlpool Gadgets forum suggests that, for the REU-VR2426WB-50-AK, higher temperatures can be obtained by altering the SW1 DIP Switch settings as follows: It is definitely possible to alter the maximum temperature on Rinnai models that are NOT marked as “50 deg C Compliant”.
Where does the Rinnai hot water controller go in the bathroom?
This controller sounds like the one that would normally be placed in the Bathroom. My 15 year old Rinnai has a Bathroom controller that goes to 60c and the main controller in the Laundry can be pushed to 75c if nobody is using the Bathroom one.