How do I fix error code P0011?
What repairs can fix the P0011 code?
- Resetting the fault codes and performing a road test.
- Changing the oil and filter to the proper oil viscosity for the engine specifications.
- Repairing or replacing the wiring to the camshaft oil control valve for bank 1 intake camshaft.
What could cause a P0011 code?
But the main cause of the P0011 code is dirty or sludgy engine oil. If the oil is too thick or dirty, the oil passages in the camshaft phasers might get clogged or stuck, hence resulting in a constantly advanced timing in the bank 1 camshaft.
How much does it cost to fix code P0011?
How Much Does It Cost To Repair Error Code P0011. The cost of fixing error code P0011 can range from $40 to $2000 depending on the cause of the problem and the age of the vehicle.
Can I drive with code P0011?
Can I drive my car with a P0011 code? but you will probably be all right. P0011 usually indicates a problem with the variable camshaft timing device. In most cases the car will run without trouble.
How serious is P0011?
How Serious Is Code P0011? – Severe. This trouble code severely impacts the drivability of your vehicle. The most common problems consist of increased engine stalling, rough engine idle, lowered fuel economy, and rattling/knocking noises from the engine.
Is a P0011 code bad?
The P0011 code can cause a lot of unwanted effects if you do not take care of the diagnostic fix and keep your vehicle in working condition. The engine might run erratic and stalls while driving, which can be very dangerous while you are driving on highways.
Can low oil cause P0011?
Causes of Code P0011 However, few are as prevalent as low engine oil, or the use of oil of an incorrect viscosity. This stems from the fact that engine oil is used as the driving input force for cam phasing operation. Therefore, oil-related issues of any type can quickly trigger a P0011 trouble code.
Can spark plugs cause P0011?
If the crankshaft position sensor is faulty or damaged, then the electronic control module might not be able to decide when to fire the spark plugs. This can cause the P011 code in your car.
How much does it cost to fix a camshaft timing?
To replace a camshaft position sensor, you can expect to pay anywhere from $95 to $200. Parts alone will run about $25 to $100. Labor costs will be in the range of $70 to $100 for professional replacement. Expect to pay more if you have a luxury vehicle or are having your local car dealership perform the replacement.
Where is camshaft position sensor bank1?
The sensor is at the front right top of the engine beneath the large plastic engine cover. It is held on by a single T-30 torx bit machine screw. Please note that OBD-II diagnostic trouble codes, such as the code relied on to “advise” you, can NEVER be used to “directly” condemn parts.
Can you clean camshaft sensors?
Spray a small amount of solvent on the sensor. Wipe it dry with another rag. Replace the camshaft sensor, and tighten the screws. Attach the three wires back into their original positions, and connect the negative battery cable.