Table of Contents
What is the most common rough-in size for a toilet?
12 inches
12 inches is the most common toilet rough-in size. However, it’s useful to know that toilet’s also come in: 10-inch rough-in.
How do I know toilet rough-in size?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
Can you replace a 12-inch rough-in toilet with a 10-inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
How do you measure a 10-inch or 12-inch rough-in for a toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
What’s the size of a standard toilet?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
How far should a toilet be from the wall?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How far from the wall should a toilet rough-in Be?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.
What does 10-inch rough in toilet mean?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
Can you put a 12-inch rough in toilet on a 14-inch rough in?
Terry Administrator Staff Member Any 12″ toilet will work for a 14″ rough. If you want to pull the bowl back 2″, then there is only one method.
Are toilets universal size?
Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.
What is the minimum size of a toilet?
The International Residential Code (IRC) sets the required minimum dimensions of a toilet room at 30 inches by 60 inches. However, for increased comfort and accessibility, the National Kitchen and Bath Association suggests a minimum of 36 inches by 66 inches.
What are toilet dimensions?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.
How do you measure toilet rough in?
Measure toilet rough in with existing toilet. On either side of your toilet, you’ll see two bolts (usually with caps on them). Measure from the center of those caps or bolts to the wall and that measurement is your “rough in”.
How to measure your toilets rough in?
not on the molding at the base of the wall.
What does 10 inch Rough in toilet mean?
Measuring a 10-inch rough-in toilet is quite simple. Take some measuring tape and see how much you have from the wall to the main drain pipe. A 10-inch rough-in means that the toilet’s main drain is 10 inches away from your bathroom’s wall.
What is standard rough in toilet?
The standard toilet rough in distance is 212 inches but in the older homes and older toilets and even corner toilets, you can find toilets with rough in distances of 10 inches to even 14 inches.