What is Eco mode on phone?
While enabled, Eco Mode reduces your device’s performance and limits vibration, location services and most background data to help improve battery life. > Settings > Battery. Tap Eco Mode. Tap the switch to turn ON or OFF.
How do I reset my BT landline phone?
Switch the mains power off, wait five seconds and then turn it on again to reset your product Page 6 6. Reset the cordless phone and the base. Why does my cordless phone keep showing Register?
How do I set up speed dial on BT?
On the BT4600 which has similar software, you have to enter the number, then press and hold one of the buttons 1-9 to store the number, Or you can select Options, scroll calls to display set as speed dial and press ok. Scroll calls to the spped dial location 1-9 and select save.
How do I mute BT phone?
In standby, press and hold to dial BT 1571. Press and hold to turn the ringer on or off. HANDSET 1 Press to confirm the option displayed above the button, to delete or go back to the previous screen. Press during a call to mute your caller.
What does eco mean on my BT phone?
Some of our phones have ECO mode. If ECO mode is on, the phone only uses the power it needs to communicate with the base. So that’s instead of full transmission power all the time.
How do I connect my BT landline to my speaker?
Re: Loudspeaker function on my landline? Press the green handset key to get the dial tone and then press it again to activate to loudspeaker.
How do I set up BT answer phone?
The BT Answer message service is provided by default, but may need to be registered. To register simply call either 0800 003 800 or 0800 917 1571. Activation takes between two and ten days. Dial ‘1571’.
How do I put my BT cordless phone on speaker?
Press the green handset key to get the dial tone and then press it again to activate to loudspeaker.
How do I adjust the volume on my BT cordless phone?
With the telephone free of calls and the handset on the rest press Feature *80, the telephone should now ring, you can adjust the volume by pressing the volume bar under the keypad on the left or right. Pressing digits 1, 2, 3 or 4 while it is ringing will also change the ring type.
What does it mean when your phone is in Eco mode?
If ECO mode is on, the phone only uses the power it needs to communicate with the base. So that’s instead of full transmission power all the time. If you are not getting a good range, check that the ECO mode is turned off before moving closer to the base
What does Eco mode do on an Uniden?
The ECO feature on these uniden systems is automatic, and cannot be changed. The eco mode engages when possible, reducing power consumption in standby mode, and when close enough to the base station to use a lower power signal. Normally this is intended to extend battery life and reduce power needs, as a benefit to the user.
How does Eco Dect work on home phones?
They know when to power down to conserve energy. Most home phones will now also be supplied with a slightly different type of power supply, which also uses less energy. On some phones, such as the new Siemens Gigaset range, you can even lower the transmission power manually which can reduce consumption by up to 60%.
How to remove Eco off my hand held phone please?
If other phones work well, then it’s a uniden issue. 1) unplug both power and phone lines from the main base. 5) check for functionality. If the problem persists after this, it tends to confirm a hardware failure which would require repairs to correct.