Table of Contents
How do I access my ZTE router?
ZTE Router Login Open your web browser of choice and type IP address of your ZTE router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.
How do I setup my ZTE wireless router?
How to configure the APN on your ZTE LTE Device
- Connect to your router directly via LAN cable or Wi-Fi.
- Open your internet browser.
- Navigate to the routers IP address.
- Enter 192.168.
- Log into the router.
- Click Login.
- In the router Home interface, under ‘2 My Router’, select “LTE /UMTS Settings”.
How do I change my ZTE WIFI name and password?
Type http://setup.zte in the address bar, then press Enter on your keyboard. Type http://setup.zte in the address bar, then press Enter on your keyboard. Enter the password (default is admin), then click Login. Enter the password (default is admin), then click Login.
How do I hide my wifi on my ZTE router?
Change “Visibility Status” to “Invisible,” or check “Enable Hidden Wireless,” and then click “Save Settings” to hide the SSID.
Can APN increase internet speed?
Change APN settings To increase the speed of the internet, check the Axis Point Network (AP Point Network). For this high speed, it is important for the APN to be correct. There is an option in the network settings itself.
What do I need to know about ZTE h108n router?
Pick the guide that most closely matches your router. The ZTE ZXHN H108N router includes a basic firewall that helps protect your home network from unwanted access from the Internet. A firewall by design will keep all connections closed to and from the Internet unless you tell it otherwise.
How to access zxhn h108n web shell and secrets?
In part one, we hacked and gained access to shell of the ZXHN H108N as root through Telnet, part two will talk about ZXHN H108N router web-shell and secrets, and I will show you how to access all that in few simple steps.
How to enable privileged mode on zxhn router?
First, we must connect to the router through Telnet, and enable the advanced commands mode: Connecting to the router: telnet 192.168.1.1 Username: root, password: public. Once you get the command-line prompt, we need to enable the privileged command, to do that you should use the command enable.