How do you fix LF error on Maytag washer?

How do you fix LF error on Maytag washer?

LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.

Why is my Maytag washer stuck on sensing?

If your Maytag washer’s sensing light is stuck and will not move to the appropriate cycles, this is usually caused by a stuck or keypad. The keypad can occasionally become jammed or, if you have recently replaced a part on the washer, you may have forgotten to recycle the codes, which can lead to a stuck sensor light.

Why is my Maytag washer not starting?

If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. Select a wash setting and pull out the knob to start the cycle. If it still won’t start, reset the circuit breaker or change out the fuses if they are blown.

Is there a reset button on Maytag washing machines?

Press “Start/Pause.” You have now reset your Maytag washer.

What to do if my washer is stuck on sensing?

You may unplug and plug in the washer and turn the power on. Lift and close the lid about six times within 12 seconds to reset the unit. You can also reset your washer by checking your product manual. Start a new wash cycle and test the appliance.

How do you restart a Maytag washer?

How to Reset a Maytag Washer

1. Press the “Power/Cancel” button.
2. Push the appropriate button to choose a new cycle.
3. Press “Start/Pause.” You have now reset your Maytag washer.

What are some Maytag washer error codes?

Error Codes on Maytag Washers Sd/Sud. To alert you that there are excess suds in the machine, Maytag’s Bravos line of washers show an “Sd” code, while the Maxima models show an “Sud” code. oL. Maytag’s Bravos washers will display an “oL” error code to indicate that the machine is overloaded. uL. LF/Ld. HC. dL/lid/dU. dEt. F08, E01. F09, E01. F05, E02.

What do Maytag dryer error codes mean?

An “AF” error code in your Maytag dryer’s display indicates that the appliance is suffering from low airflow. In most cases, the airflow is reduced due to a clogged vent or lint screen. In addition, the vent may be kinked or bent so air has difficulty reaching the dryer.

What does F5 mean on a Maytag oven?

Maytag error F5 and F3 do have different indications. Error F5 means watchdog and hardware conflict. The only way to resolve this is to replace clock (ERC). On the other hnd, F3 means you have shorted or open oven temperature sensor ( RTD ).