What is Diamond clear coat?
DiamondFinish Clear is a tough Clear Coat that can be applied Direct To Metal or over other coatings. This water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
What is the toughest clear coat?
All Cerakote Ceramic Clears have industry leading durability, hardness, scratch resistance flexibility and chemical resistance and have been designed specifically to be the thinnest, yet strongest, clear coating on the market and can be applied to nearly any substrate, from Hydrographics and Composites, to Metals.
How do you use KB diamond clear coat?
Apply DiamondFinish Clear to clean and dry prepared surfaces using a bristle brush, foam brush, low nap roller, or spray equipment. DiamondFinish Clear has superior self-leveling characteristics. Brush marks will flow out very nicely. When brushing, apply thin covering coats: AVOID PUDDLING OR POOLING.
How long does diamond clear last?
3 years in original, unopened package. Sealing 450 to 550 400 to 450 Older Concrete (11.0 to 13.5) (9.8 to 11.0) Coverage will vary depending on surface porosity and texture.
How long does diamond clear coat last?
*Low concrete or air temperatures and/or high relative humidity will extend drying times. and appearance. Diamond Clear 350 is packaged in 55 gal (208 L) drums and 5 gal (18.9 L) pails. 3 years in original, unopened package.
Is Diamond Clear coat toxic?
Harmful: May cause lung damage if swallowed. May cause sensitization by skin contact. Avoid contact with skin and eyes.
What is better 1K or 2K clear coat?
The significant difference between 1K and 2K clear coat is the need for a catalyst to dry. 1K can dry without any additives, whereas a 2K clear coat needs a catalyst to harden. Otherwise, it won’t fully dry. Generally speaking, 2K clear coat is double the price of the 1K alternative, but for a good reason.
What is the hardest clear coat for cars?
DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
What kind of coating is diamondfinish clear coat?
DiamondFinish Clear is a permanent high solids (over 60%) and low VOC’s Clear Coat. DiamondFinish Clear is a Moisture Cured Urethane which is an advanced coatings technology offering durability, flexibility, corrosion and chemical resistance. DiamondFinish Clear can be applied directly to Painted Surfaces with Minimal Surface Prep.
What’s the best way to apply diamondfinish clear?
DiamondFinish Clear can be applied with a brush (without leaving any brush marks), roller and conventional spray gun. With DiamondFinish Clear, unlike normal two-part coatings, no hardener is needed. You can just stir and go. DiamondFinish Clear will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
How long does it take to recoat diamondfinish clear?
RECOATING: Re-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint which is typically within 2-4 hours depending on temperature and humidity. Clean your spray gun immediately after using DiamondFinish Clear. FOR BEST END RESULTS, always apply coats consecutively within 8 hours of each coat curing.
How many coats of diamondfinish clear in an aerosol can?
A: DiamondFinish Clear Aerosol is very convenient and produces a professional looking finish. Because it takes quite a bit of solvent to thin down DiamondFinish Clear to get it in an aerosol can, it requires 6 coats of DiamondFinish Clear Aerosol to equal one coat of DiamondFinish Clear.