Table of Contents
What are frequency response curves?
A frequency-response curve of a loudspeaker is defined as the variation in sound pressure or acoustic power as a function of frequency, with some quantity such as voltage or electrical power held constant.
What is frequency response and phase response?
The frequency response H(jω) is a function that relates the output response to a sinusoidal input at frequency ω. That is, we can separate H(jω) into its magnitude (called amplitude response) and its phase component (called phase response).
What is the difference between frequency and frequency response?
What’s the difference? Frequency Range is the actual span of frequencies that a monitor can reproduce, say from 30 Hz (Bass) to 22 kHz (Treble). Frequency Response is the Frequency Range versus Amplitude. In other words, at 20 Hz, a certain input signal level may produce 100 dB of output.
What is a frequency response curve used for?
Frequency response curves are often used to indicate the accuracy of electronic components or systems. When a system or component reproduces all desired input signals with no emphasis or attenuation of a particular frequency band, the system or component is said to be “flat”, or to have a flat frequency response curve.
Is higher frequency response better?
The first number in a frequency response spec refers to the deepest bass frequency the headphone can reproduce, the lower the number the better; and the second number refers to the highest frequency the headphone is capable of, and the higher the better.
What frequency response means?
Frequency Response describes the range of frequencies or musical tones a component can reproduce. Frequency response measures if and how well a particular audio component reproduces all of these audible frequencies and if it makes any changes to the signal on the way through.
What does a flat frequency response curve mean?
The frequency response curve (so-called because a speaker’s or headphone’s frequency response will curve, or roll off, in the low bass and high treble) is pretty flat (“flat” is good, because it means the device is accurate), with no serious peaks, dips or other up-and-down variations.
How does phase angle affect the frequency response?
In one sense, you can consider the effects of phase angle being built into the frequency response (which represents voltage sensitivity over the full bandwidth): whether the phase angle is 0 degrees or 60 degrees, the voltage demanded from the amplifier remains the same.
Which is the best definition of frequency response?
Frequency response is the quantitative measure of the output spectrum of a system or device in response to a stimulus, and is used to characterize the dynamics of the system. It is a measure of magnitude and phase of the output as a function of frequency, in comparison to the input.
Which is an area under a frequency vs time curve?
The total accumulated phase shift (Φ) can be thought of as the area under a frequency vs time curve. This fact will prove useful when we discuss the phase changes induced by gradients or flow in later Q&A’s. If you still don’t quite understand why (frequency x time) = phase, think about the units of measurement.