Table of Contents
Where should the waste be on a shower tray?
The waste outlet can be located either at the front or at the back of the installation. However, the waste cover MUST NOT be impeded by either tiles or an enclosure. The floor area (or larger) covered by the shower tray must be removed and replaced with a single level piece of plywood (minimum 18mm thick).
What are matki shower trays made of?
The Shower Tray is moulded from Matki’s fully restorable Solid Surface material. Every Preference Shower Tray is expertly finished by hand. Bespoke shapes and sizes are drawn up specially by Matki’s specialist draughtspeople.
Where are matki showers made?
the UK
Made in the UK from the highest quality materials, Matki products are hand-assembled to achieve the unrivalled luxury and durability for which the brand is renowned.
How do you unblock shower tray waste?
First pour a pot of boiling water down your drain. Pour a small amount (perhaps half a cup) of baking soda down the drain. Let it sit there for a couple of minutes. Follow it up with a cup of white vinegar and a little more hot water.
How do you unblock a Mira shower drain?
First, make sure that you’ve removed as much standing water as possible, then pour some baking soda down the plughole. A couple of teaspoons should do it. Next, pour in a cup of vinegar and listen for the fizzing as the two react. Once the fizzing stops, pour some hot water down the drain to flush it all out.
What drop is required on a shower waste?
Waste pipes need to be installed sloping down to ensure the water runs the right way. This needs to be a minimum of 10mm fall for every 4m of pipe which can lead to insufficient fall within the floor void under baths or showers (especially under low-level or flush shower trays).
How do you adjust a matki shower door?
Adjust the position of the threshold adjuster as required to align the curved floor rail evenly from the front edge of the tray. To adjust loosen the screw 1 full turn, re-tighten after adjustment, do not over tighten. Plumb the wall mount for upright and mark the fixing holes in the centre of the slots.
How do you unblock a walk in shower?
Pour half a cup of baking soda down the drain, followed immediately by half a cup of distilled vinegar. The combination will create a fizzing action that will work away the blockage. Leave it to work for at least twenty minutes and then pour a kettle of hot water down the drain to flush away the blockage.
Why does my shower drain smell like rotten eggs?
A rotten egg smell is caused either by biofilm clogging the shower drain or the backup of sewer gasses through the drain. Sewer gas backup is typically caused by blocked plumbing vents, a dry p-trap, or sewer backup.
Are there any spare parts for a Matki shower door?
Some of the parts/part and codes have been changed/modified super ceded. We are happy to give prices as and when requests are sent through, so we can advise the most current price at the time
What should I use to clean my Matki shower glass?
Wash down the inside of the glass with clean water, wipe away any water droplets with a squeegee or cloth, then dry the glass with a soft, clean micro-fibre cloth. We recommend using the Matki Shower Cleaner and Care Cloth, which can be purchased over the phone from our Customer Services Team at the following prices:
What should I use to clean my Matki?
Avoid the following as their use may damage your product and invalidate your Matki Guarantee: For all metal parts we recommend using a soft micro-fibre cloth and warm, soapy water to clean off any marks then drying with another micro-fibre cloth.
What makes a Matki Glass Guard last so long?
This makes the glass easier to clean and minimises the need for cleaning detergents. The lifespan of the Matki Glass Guard is dependent on the frequency of use of the shower, degree of water hardness and how well the glass is looked after.