How do I fit a concealed door closer?
How to Fit a Concealed Door Closer
- Step 1 – Drilling the hole. Mark the position of the closer on the hinge-edge of the open door.
- Step 2 – Marking the plate position. Slot the metal barrel back into the hole and close the door.
- Step 3 – Attaching the screw plate.
- Step 4 – Fixing the anchor plate.
How do you adjust a concealed overhead door closer?
To increase either the closing or latching speeds, turn the appropriate adjustment valve counter-clockwise. To decrease either the closing or latching speeds, turn the appropriate adjustment valve clockwise. Set the latching speed (Valve “L”) first, then set the closing speed (Valve “C”).
How do I adjust Perko?
Adjusting Procedure 1 Fit metal fixing plate (4) as near to cylinder plate (2) as possible. 2 Remove anchor plate (3). : 3. Turn anchor plate clockwise to increase tension; anti-clockwise to decrease tension.
How do you remove a self closing door hinge pin?
Use a hex wrench to open the spring and view the tension pin. Afterward, use the pliers to eject the tension pin. Disengage the hex wrench from the spring to unroll it and then use a screwdriver to remove the screws. The hinge should come off easily without any struggle if you followed all the steps keenly.
How much does a perkomatic concealed door closer weigh?
Perkomatic is the ultimate in uncontrolled, concealed door closing devices, with outstanding performance and durability. Designed for light to medium use situations on internal doors up to 75kg/165lbs in weight.
Which is the best concealed door closer for a building?
Properly fitted and adjusted, Perko®, Perkomatic® and Powermatic® concealed door closers will enhance the safety and comfort of a building for all of its occupants and provide maintenance-free service for many years following installation.
Is the perkomatic fire door suitable for replacement?
Fire test and product information can be obtained from the downloads section on the right hand side of this page. This product (Perkomatic R85) is not suitable for use on fire doors in the United Kingdom or European Union, either in a new installation or as a replacement on a notional fire door.
Can you use an uncontrolled door closing device?
Where door closers are concerned, currently, this means that only controlled door closing devices can be used. CE marking of uncontrolled devices is not currently available, as the necessary harmonised European standard has not been published. This is an uncontrolled door closer.